Products

This is a full synthetic engine oil specifically designed for hybrid vehicles. In hybrid vehicles the combustion engines (ICE) are smaller, and as switching between the combustion engine and electrical engine increases friction tremendously, different engine oils are needed. This product has been specifically developed for these hybrid engine combinations. This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. This engine oil offers complete protection to a range of modern passenger car and light truck diesel and gasoline engines, equipped with or without emission after treatment system. The API SN Plus specification shows the lubricant's compatibility with highly fuel-efficient GDI engines, in which this oil prevents LSPI from damaging the engine components. This engine oil enables some of the most advanced engine designs to reach their targeted fuel-economy levels, which is proven by meeting the MB 229.71 and BMW Longlife-17FE+ specifications. These properties in combination with outstanding total engine protection guarantee optimal maintenance of the latest engine designs of different OEMs such as Opel and BMW.

This is a full synthetic engine oil for light commercial vehicles, that uses the latest MID SAPS technology. This results into the fact that this product has outstanding fuel economy properties and extended service life. This product can be used in gasoline as well as diesel engines and is suitable for vehicles that have diesel particle filters (DPF) and after treatment devices (ATD). It has all the properties that meet the Dexos 2TM specifications. Hereby it is required for all new GM/Opel/Vauxhall/Chevrolet diesel and gasoline engines. This product can also be used when an older specification (GM-LL-A-025 or GM-B-LL-025) is prescribed. It meets the latest EURO 4 and EURO 5 emission norms and also includes all the specifications of C2 and C3 oil.

This is a full synthetic engine oil that has been developed for light commercial vehicles and vans that require the Ford WSS-M2C-913-A/B specification and replaces the M2C-913-A/B specifications. This specification is mandatory for all FORD models from model year 2009 and higher. Also, this product is needed when the vehicles are equipped with the 2,2 Duratorq engines. This engine oil has over 3% fuel saving properties and can also be used for vehicles that have older specifications with the exception of the models which are equipped with pump injectors.

This C4 engine oil is a high quality full synthetic lubricant for the use in gasoline and diesel engines for light commercial vehicles and vans. This lubricant is based on the most advanced low SAPS technology with a minimum HTHS viscosity of 3.5 mPa.s. Meaning that this product can be particularly useful when low sulphated ash, phosphor and sulphur contents are required. It enhances the lifetime of the DPF and the TWC, and maintains the high fuel economy rating of the engine. It is suitable for use in any Renault requiring RN0720 specification, but also Nissan or other OEM requiring an ACEA C4 type of oil.

This engine oil is made of Synthetic base oils. It contains of extremely well formulated additive packages. This oil is specifically formulated for LCV vehicles. This product can be used in vehicles where the EURO 4 norm is needed. It is suitable for gasoline and diesel vehicles that need the API SL specification or older. This oil can be used for direct injection such as Common Rail, HDI, CDI, etc. Also, this oil can be used in supercharged vehicles. This product has a very high resistance against oxidation, ensures engine protection and meets a variety of specifications.

This product is a very advanced mineral engine oil that has been developed for gasoline and diesel engines. This product is made of the finest European base oils and additives. This product meets and exceeds many of the industry and OEM specifications required by newer modern gasoline and diesel powered automobile engines. This product has active cleaning agents that help to reduce the deposit and sludge build up in the engine. This product can be recommended for all types of modern vehicles including vehicles with turbochargers, superchargers and multi-valve injected engines.

This product is a very advanced mineral engine oil that has been developed for gasoline and diesel engines. This product is made of the finest European base oils and additives. This product meets and exceeds many of the industry and OEM specifications required by newer modern gasoline and diesel powered automobile engines. This product has active cleaning agents that help to reduce the deposit and sludge build up in the engine. This product can be recommended for all types of modern vehicles including vehicles with turbochargers, superchargers and multi-valve injected engines.

These engine oils have the API SF/CD specification for passenger car engine oils and are perfectly suitable for the more traditional car portfolio. The API SF/CD specification on our engine oils refers to engines that service typical of certain naturally aspirated, turbocharged or supercharged diesel engines operated in moderate to severe-duty service, and certain heavy-duty gasoline engines. The higher SAE 40 grade is suitable for areas where the engines operate under high tropical circumstances. Concerning formulation these engine oils are made of natural, paraffinic base oils group I combined with special additive packages. These engine oils offer good resistance to oxidation and corrosion and protect the engine. Next to that these oils have a low ash content.

These engine oils have the API SF/CD specification for passenger car engine oils and are perfectly suitable for the more traditional car portfolio. The API SF/CD specification on our engine oils refers to engines that service typical of certain naturally aspirated, turbocharged or supercharged diesel engines operated in moderate to severe-duty service, and certain heavy-duty gasoline engines. The higher SAE 50 grade is suitable for areas where the engines operate under high tropical circumstances. Concerning formulation these engine oils are made of natural, paraffinic base oils group I combined with special additive packages. These engine oils offer good resistance to oxidation and corrosion and protect the engine. Next to that these oils have a low ash content.

This is a full synthetic engine oil that is formulated with our PAO (Poly Alpha Olefin) technology. This product is suitable for passenger cars equipped with gasoline, diesel and LPG engines and that have after treatment devices and diesel particle filters. The PAO base oils used in this formulation ensure excellent low temperature fluidity, oxidation stability and thermal stability. The PAO synthetic base stocks offer low volatility required to perform the harshest temperatures. This product has exceptional properties compared to normal full synthetic engine oils and meets a variety of specifications. This product can be used perfectly in applications that are in need of demanding properties like racing and sporty driving.

This is a full synthetic engine oil that is formulated with our PAO (Poly Alpha Olefin) technology. This product is suitable for passenger cars equipped with gasoline, diesel and LPG engines and that have after treatment devices and diesel particle filters. The PAO base oils used in this formulation ensure excellent low temperature fluidity, oxidation stability and thermal stability. The PAO synthetic base stocks offer low volatility required to perform the harshest temperatures. This product has exceptional properties compared to normal full synthetic engine oils and meets a variety of specifications. This product can be used perfectly in applications that are in need of demanding properties like racing and sporty driving.

This is a full synthetic engine oil that is formulated with our PAO (Poly Alpha Olefin) technology. This product is suitable for passenger cars equipped with gasoline, diesel and LPG engines and that have after treatment devices and diesel particle filters. The PAO base oils used in this formulation ensure excellent low temperature fluidity, oxidation stability and thermal stability. The PAO synthetic base stocks offer low volatility required to perform the harshest temperatures. This product has exceptional properties compared to normal full synthetic engine oils and meets a variety of specifications. This product can be used perfectly in applications that are in need of demanding properties like racing and sporty driving.