Products

This engine oil is made of Synthetic base oils. It contains of extremely well formulated additive packages. It is suitable for gasoline and diesel vehicles that are in need of the API SL specification or older. This oil is also particularly suitable for four-vale and turbo diesel engines with or without turbo. This product has a very high resistance against oxidation, ensures engine protection and meets a variety of specifications. One of the reasons why this product is extremely suitable for also the more modern car portfolio is its engine cleanliness properties and its additive package that ensures extended oil drain intervals and fuel saving.

This engine oil is made of Synthetic base oils. It contains of extremely well formulated additive packages. It is suitable for gasoline and diesel vehicles that are in need of the API SL specification or older. This oil is also particularly suitable for four-vale and turbo diesel engines with or without turbo. This product has a very high resistance against oxidation, ensures engine protection and meets a variety of specifications. One of the reasons why this product is extremely suitable for also the more modern car portfolio is its engine cleanliness properties and its additive package that ensures extended oil drain intervals and fuel saving.

This is an ultramodern full synthetic engine oil suitable for turbocharged gasoline direct-injection (TGDI) engines and is known for its API SP / ILSAC GF-6 specification. This engine oil ensures superior Fuel Economy properties, compared to products with the older API SN PLUS and API SN specification. It is specifically developed in order to prevent LSPI (Low Speed Pre-Ignition). LSPI is very common when a vehicle is driving slowly and suddenly accelerates rapidly. As a result, particles of fuel and oil will ignite in the combustion chamber. This product is specifically developed to avoid this premature LSPI and hereby avoids damaging the engine. In addition to this, the relatively smaller engines from modern vehicles require extreme performance of the oil as they perform under extreme operating conditions. The lower viscosity and excellent fluidity in this engine oil reduce wear and lowers CO2 emission. This product also meets the newest ILSAC GF-6-B specification. ILSAC GF-6B oils are NOT backwards compatible with vehicles that use older ILSAC oils, unless stated otherwise by the OEM. ILSAC GF6 engine oils are developed to provide superior fuel economy properties.

This is a full synthetic engine oil that has been developed for the Ford and Land Rover that have WSS-M2C-913-C/D and STJLR.03.5003 specifications and replaces the M2C-913-A/B specification. This specification is mandatory for all Ford models from model year 2009 and higher. Also this product is needed when the vehicles are equipped with the 2,2 Duratorq engines. This engine oil has over 3% fuel saving properties and can also be used for vehicles that have older specifications with the exception of the models which are equipped with pump injectors (Galaxy I en II) and Ford Ka (diesel and gasoline from 2009).

This full synthetic engine oil is formulated for the VW group. This product can be used in petrol and diesel engines. These oils are especially for Petrol "Pumpe-Duse" (unit injector or PD engines) engines running on extended service intervals (30.000 – 50.000 km / 24 months). They are also particularly suitable for diesel engines with extended service intervals of up to 50.000 km / 2 years. They cannot be used for engines with a single injector pump. This engine oil has very high fuel saving properties. This oil should not be used in engines where the VW 503.01 is required.

This product is specifically formulated for vehicles that require the VW 508.00 / 509.00 specification. It is made of full synthetic base oils and it is developed in order to extend the lifetime and maintain efficiency of emission systems. The 508.00 (which is designed for gasoline engines) and 509.00 (which is designed for diesel engines) specifications represent the high levels of fuel economy that can be used with these lubricants. This product is developed for mandatory use in the newest 2.0 TFSI 140 kW and 3.0 TDI CR 160 kW engines. Please take into consideration that these specifications are not backward compatible with the earlier VW specifications.

This is a multi-grade engine oil that is developed for a wide vehicle portfolio and can be used in 4-stroke gasoline and diesel engines with or without turbo. It is developed for passenger cars as well as minibuses, vans and light trucks. One of the most important features of this product is that it is formulated to ensure total engine protection. The additives that are used in this formulation ensure that a good protective layer adds to the engine components. A result of this is that it provides very good cold start properties. This product is advised when there is a lot of city traffic where a lot of start-stop driving is applicable.

This engine oil is made of mineral base oils. It contains of extremely well formulated additive packages. It is suitable for gasoline and diesel vehicles that are in need of the API SL specification or older. This oil can be used for direct injection such as Common Rail, HDI, CDI, etc. Also this oil can be used in supercharged vehicles. This product has a very high resistance against oxidation, ensures engine protection and meets a variety of specifications.

This engine oil is made of mineral base oils. It contains of extremely well formulated additive packages. It is suitable for gasoline and diesel vehicles that are in need of the API SL specification or older. This oil is also particularly suitable for four-vale and turbo diesel engines with or without turbo. This product has a very high resistance against oxidation, ensures engine protection and meets a variety of specifications. One of the reasons why this product is extremely suitable for also the more modern car portfolio is its engine cleanliness properties and its additive package that ensures extended oil drain intervals and fuel saving.

This is a 2-stroke engine oil that has been made from the most excellent full-synthetic base oils. Additives are added that ensure complete engine lubrication. It reduces deposits in the combustion chamber and flushing ports. Also it contains very high cleaning properties in order to clean the spark plugs. This ensures that the engine will keep its power over time. The formulation ensures that there is low to little smoke formation and this product is perfectly suitable for high-speed as well as heavily loaded air-cooled 2-stroke engines. This product can also be used in engines with water cooling/radiator cooling. Dosage: 2 to 4% according to manufacturers recommendation.

This is a 2-stroke engine oil that has been made from the most excellent Synthetic base oils. Additives are added that ensure complete engine lubrication. It reduces deposits in the combustion chamber and flushing ports. Also, it contains very high cleaning properties in order to clean the spark plugs. This ensures that the engine will keep its power over time. The formulation ensures that there is low to little smoke formation and this product is perfectly suitable for high-speed as well as heavily loaded air-cooled 2-stroke engines. This product can also be used in engines with water cooling/radiator cooling.

This is a full synthetic motorcycle and scooter engine oil that can be used in vehicles that require a wide variety of API specifications. The ester technology that has been used in these products ensures very high VI indexes and high protection properties. This product can be used for city driving, sports driving, short distance driving and as well as long distance driving. There is a special thickener that has been added to this product in order to prevent brake down. The additive package ensures that even at high operating temperatures, the viscosity stays in grade and ensures a strong lubricating film. This oil is formulated so that it offers excellent protection in the gearbox as well as the wet disc clutches and it prevents slippery and sticking of the clutches. These products meet the JASO MA specifications that ensure that this product can be used in all 4-stroke motorcycle engines with one oil system for engine, gearbox and wet cutch systems.